Name Release Date Size MD5
Serial to Ethernet Manual Oct 26 2021 208.4 KB 0bc19c4f473728cdf0b20cfd6193de23

Serial-to-Ethernet is one of the applications from the all-in-one update project that comes pre-installed on your JNIOR. You only need to enable the Serial-to-Ethernet application to start on boot. Opening the JNIOR’s WebUI, and going to the applications section of the Configuration tab clicking the checkbox next to Serial-to-Ethernet enables it to run on boot. You’ll need to restart the JNIOR for this to take affect.

Serial-to-Ethernet acts as a converter between a Serial device connected to the JNIOR and a remote application communicating with the JNIOR. This allows a remote device to communicate with a serial device even if the serial device can’t establish an Ethernet connection, and vice versa. This implies that the connection made using to Serial-to-Ethernet is bi-directional so that information can travel both ways.

A connection can be made to the JNIOR using Serial-to-Ethernet, by using the TCP port 9201 for the Ethernet connection and uses the serial settings set in the configuration tab for a Serial connection

Related Posts: